|
AMSOIL Product
|
Outboard*
|
Snowmobile*,
Motorcycle* & ATV*
|
Personal Watercraft*
& Jet Boat*
|
Chainsaw,
Chop Saw & Pump
|
Weed Eater,
Blower & Lawn Mower
|
Moped, Scooter
& Go-Cart
|
Even though AMSOIL 2-Cycle Oils have been optimized for specific
applications, they are multi-functional and recommended for use in
many areas. The chart rates each oil's performance abilities per
application as follows:
Excellent: "The" primary recommendation for
the oil. This is the best possible choice for the application. The
oil is specifically designed for the operating conditions of the
motors in these markets. There is only one "Excellent"
recommendation per category.
Very Good: A main recommendation for the
oil. Identifies an oil that is very good for the operating
conditions of these motors.
Good: A secondary recommendation for an
oil. The oil was not specifically designed for these applications,
however, the chemistry in the oil is suited to the operating
conditions of these motors.
Not Recommended: Identifies applications
where the product was not intended for use. "Excellent" rated
products offer superior performance.
Racing:
(1) Not recommended for long-term use in
outboard motors as a TC-W3 type oil, although excellent as a
race oil for short term use where motors are periodically
inspected.
(2) Excellent for racing or modified motors.
Very good for recreational use.
*Recommended for all (DFI) direct fuel injected, (EFI)
electronic fuel injected, and carbureted motors. Outboard motors
include Mercury®, Optimax®, Johnson® & Evinrude® FICHT® & E-TEC®,
Yamaha® HPDI, Nissan® & Tohatsu® TLDI®
|
 |
|
New AMSOIL "Fabulous Four" 2-Cycle Oils provide
second-to-none
protection and performance in modern two-cycle
equipment
Two-cycle engines remain the workhorses in
recreational equipment, including outboard
motors, motorcycles, snowmobiles and personal
watercraft, as well as in lawn and garden
applications like lawn mowers and weed eaters.
Design changes over recent years have included
direct fuel injection engines, in which fuel is
injected directly into the combustion chamber,
and exhaust power valves, which improve
combustion efficiency at varying RPM. These
design changes have allowed two-cycle engine
manufacturers to effectively reduce emissions,
improve fuel efficiency and decrease oil
consumption. Today's two-cycle motors of all
types require specialized oil technology to
deliver maximum engine protection,
dependable operation and long service life
As the leader in two-cycle oil technology,
AMSOIL has performed extensive research in
developing a new line of revolutionary,
specialized oils called the "Fabulous Four."
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil (AIT)
was the first new oil to be introduced. It is
primarily recommended as an injector oil or at a
50:1 mix ratio in carbureted, electronic fuel
injected (EFI) and direct fuel injected (DFI)
snowmobiles, personal watercraft, motorcycles
and ATV's. Formulated with wax-free premium
quality synthetic esters and a specialized
additive package, INTERCEPTOR is designed to
address the exhaust valve sticking problems
associated with certain snowmobile models.
New AMSOIL HP Injector Synthetic 2-Cycle Oil (HPI),
DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) and
Saber Professional (ATP) and Outboard (ATO)
Synthetic 100:1 Pre-Mix 2-Cycle Oils complete
the Fabulous Four lineup, replacing AMSOIL
Synthetic 2-Cycle Injector Oil, Series 2000
Synthetic 2-Cycle Racing Oil and 100:1 Pre-Mix
Synthetic 2-Cycle Oil, respectively. The
application chart below ranks each oil's
performance in common two-cycle applications. |
|
|
